We have reworked your trigger to enhance the performance of the rifle and to give you the best pull possible from a two stage trigger. Remember a trigger group with a safety system is a mechanical device and any mechanical device could fail at any time so always follow strict gun safety procedures when handling any firearm!! Never point your rifle at anything you don’t want to destroy should the safety fail!!! If for any reason you experience any trigger safety issues STOP using the firearm immediately and contact us. What you should expect from your trigger after we have improved it. Remember your trigger is a factory two stage. What most people think of as creep is actually take-up which is an added safety measure in the trigger design, this is the first stage. What we do is remove 90 to 100 % of the first stage take up depending on what the factory gave us to work with. Meaning no two triggers are exactly the same. 1) You will notice a new take up screw installed under the trigger housing this is there to minimize the rearward travel of the first stage take up. Do not tamper with this screw with out contacting us first because this screw serves a few functions besides take up. Your trigger, secondary sear (disconnector) and hammer have been tuned for the best pull possible! We recommend a 90% reduction of take up. With the rifle pointed in a safe direction pull the trigger slow and you will feel a slight click. At this point the trigger is ready to break with any further pressure. We call this a semi set trigger and in no way will it hinder the semi auto function but give you the best of both worlds. The 100 % take up reduction option when possible will eliminate any take up and will fire with 3.5 pounds of pressure when applied immediately. Dry fire your trigger to make yourself familiar with it before going to the field! Please contact us if you have any problem at all and we will take care of it promptly.
ACCURACY SYSTEMS, INC.
1661 BEHRENS RD BYERS, CO 80103
303-822-6849 accuracyinc1@aol.com