Mini 14 & 30 Gas Bushing instructions: Mini 14 Sizes

Mini 30 Sizes

1. Lock you action back.
2. Remove your stock.
3. Remove your Hand Guard.
4. Use a flat surface uncluttered so you do not lose your small parts.
5. Use a 9/64 Allen wrench to remove the four 8-40 Allen head screws from your gas block.
6. It is best if you remove both screws on one side first which will take some tension off of the opposite side’s screws.
7. Now take off the gas block from the barrel.
8. You will now notice your factory bushing which also serves to hold the gas pipe in place and aligns the gas block on the barrel.
9. Remove the factory gas bushing and install one of ours from the kit. We recommend starting with one of the middle sized bushings.
10. Install the bushing and reassemble in reverse order the rifle as it was taken down. When re tightening your gas block screws 40 inch pounds is recommended!
11. Now test fire your rifle. The main goal is to achieve 4 to 10 feet of ejection and reliable cycling of the rifle.
12. If the rifle is still ejecting too far install a smaller ID gas bushing.
13. If the rifle is Not ejecting far enough or will not cycle install a Larger ID gas bushing.
14. If you need help or you have questions please do not hesitate to call or e mail us!
 

PRICES SUBJECT TO CHANGE WITH OUT NOTICE!

Accuracy Systems' location is not a retail/store front. It is a machine shop with dangerous machines running. For your safety we do not accept walk-ins. PLEASE CALL FOR AN APPOINTMENT IF YOU ARE GOING TO VISIT. THANKS.

Hours of operation are Monday thru Thursday 8:30 AM to 4:30 PM, Friday 8:00 AM to 12:00 PM Mountain Time Zone
(Closed Saturday & Sunday)

All prices stated in this web site are subject to change without notice.